Kubota Diesel Tractor
See video


Clean, reliable, energy-efficient power and much more

SRC : Selective Catalytic Reduction injects a urea-based additive into the hot exhaust gases which converts them into a harmless mixture of nitrogen and water vapour., DPF : Silencer diesel particulate filter, CRS : The common rail injection system electronically controls the timing and amount of fuel injected under high pressure to optimise combustion, EGR : Exhaust Gas Recirculation System

SCR

Selective Catalytic Reduction injects a urea-based additive into the hot exhaust gases which converts them into a harmless mixture of nitrogen and water vapour.

DFP

Silencer diesel particulate filter

CRS

The common rail injection system electronically controls the timing and amount of fuel injected under high pressure to optimise combustion

EGR

Exhaust Gas Recirculation System

Moteur Kubota V6108

The V6108 engine is also equipped with the latest technological developments in terms of respect for the environment and ensures that the M7001 not only meets the requirements of the latest Stage 4 final standard in terms of emissions control, but also achieves this much more efficiently.

Power Boost power reserve

Power is essential for tractor performance and the M7001 has plenty of it, ensuring it completes virtually any task quickly and efficiently.

However, to carry out specific operations requiring increased power over a short period of time, the M7001 has a power reserve, called Power Boost, which, once activated, delivers all the power needed to complete the job.

Large capacity tanks

38L
for the urea tank

330L
for the fuel tank


The speeds you need for all your activities

Optimised gear change

The M7001 is designed to offer a high level of control and manoeuvrability. It does this by automatically adjusting the operating situation to the most suitable speed, allowing the operator to remain focused on driving.
During travel, the Transport mode adapts the transmission ratio to the road conditions: uphill, downhill and bursts of acceleration.
In Field mode, the gearbox steps down two ratios as soon as the three-point linkage is raised. Field mode also minimises the variations in power take-off speed (PTO) when the selector is engaged.

K-VT

40x40
creeper

40 km
ECO

4 speeds
x
6 ranges


Advanced control with a simple objective: fast and efficient work

  • 7 inch
  • 12 inch

K-Monitor
(Optional on Ambition and Activ models)


All the M7001 functions are displayed on an LCD touch-sensitive monitor and can be adjusted and activated by a simple touch of your finger. The four main functions - Tractor control, implement control via compatible ISO BUS connector, GPS auto-guidance, monitoring camera- are continuously displayed on a user-friendly monitor to simplify adjustment and monitoring operations. It is also possible to change the information displayed so that you see only what you want to see.

K-Monitor
(Optional for Ambition and Activ models)


All the M7001 functions are displayed on an LCD touch-sensitive monitor and can be adjusted and activated by a simple touch of your finger. The four main functions - Tractor control, implement control via compatible ISO BUS connector, GPS auto-guidance, monitoring camera- are continuously displayed on a user-friendly monitor to simplify adjustment and monitoring operations. It is also possible to change the information displayed so that you see only what you want to see.


Spacious, comfortable and quiet all day long

A quiet cab and a clear view

For heavy-duty use, comfort is paramount for maximum efficiency and performance. With four cab pillars and no side pillars, the driving space and visibility puts you on a par with the leader in this tractor category.

suspension

The M7001 cab is available with different type of suspension: hydro-mechanical, pneumatic or if necessary, no suspension. The cab suspension system absorbs road impacts to improve your comfort and efficiency.

Three-level front suspension system

The front suspension of the M7001 contributes to driving comfort and more stable and precise operation of the tractor. It works seamlessly with the shock absorbers allowing you to carefully negotiate the most difficult routes.


A high-flow hydraulic system offering versatility and power

  • 1
  • 2
  • 3
  • 4
  • 5

1 - Automatic activation/deactivation of the power take-off depending on the position of the three-point front linkage

1 - Automatic activation/deactivation of the power take-off depending on the position of the three-point front linkage

You will appreciate the convenience and accuracy of the automatic power take-off when you arrive at the end of the field. The power take-off clutch (Auto PTO) is released automatically when the linkage is raised and re-applied when the linkage is lowered.

2 - Power take-off
(540/540E/1000/1000E)

2 - Power take-off<br><span>(540/540E/1000/1000E)</span>

The Kubota independent power take-off offers four rotating speeds as standard, for use with a wide range of implements. Selecting economic mode decreases noise level and reduces fuel consumption. Modulated engagement provides progressive activation of the power take-off clutch.

3 - Hydraulic system
Ambition and Activ models

3 - Hydraulic system<br><span>Ambition and Activ models</span>

The M7001 Ambition Ambition is equipped with a 110 L/min hydraulic Load Sensing system offering a variable flow rate dependent on load. The tractor is fitted with four electro-hydraulic spool valves as standard and may be equipped with up to eight spool valves with the loader.

4 - Hydraulic system
Access model

4 - Hydraulic system<br><span>Access model</span>

The Access model is equipped with an Open Centre hydraulic system as standard and an 80 L/min gear pump with three mechanically-controlled spool valves as standard. A fourth is available as an option.

5 - Three-point linkage with high capacity lifting

5 - Three-point linkage with high capacity lifting

The Category III three-point linkage offers exceptional lifting capacity to satisfy the requirements of the heaviest implements.


Total, quick and easy control at your fingertips

K-Multi-shift PowerShuttle lever (Ambition and Activ models)

To enable you to do more work in less time and with minimal effort, Kubota has developed a single multi-function lever grouping all the main functions of the M7001 together in one place. Your right hand remains on the lever, leaving your left hand free to hold the steering wheel. Tractor driving and operation couldn't be easier or more comfortable.

Relax multi-function lever(Access model)

The Access model is fitted with a multi-function lever easy to operate using just one hand. A speed control switch is used for changing gear and steering and for working at an ideal speed whatever the application. Other controls can be operated using your fingertips, such as the rear linkage or transmission Auto mode.


Fully configured to support a wide range of implements and tasks

"Z" formation mechanical parallelogram

As there is no loader upper link, the Kubota "Z" formation mechanical parallelogram system provides forward visibility with no obstruction.

Front loader control joystick

Joystick de commande de chargeur frontal desc

Quick coupling of hydraulic connections using a single lever

The operator can quickly connect and disconnect the four hoses at the same time simply by pulling a lever, making it easy to carry out jobs requiring the attachment of a hydraulic implement.

Fast fitting and removal of the loader

Fitting and removal of the front loader couldn't be easier by means of the boom supports and two mounting pins. No tool is required. Using this fast fitting and removal system, work can be resumed in just a few minutes.

Kubota KSR damping system

The KSR damping system helps to reduce operator fatigue, giving the tractor a smooth ride. This function is particularly useful for tasks involving lots of tight half-turns and multiple lifting and tipping operations of heavy loads. It also provides stability when handling round hay bales.

Third hydraulic function as standard

The third function, fitted as standard, allows the use of a bucket scoop and other hydraulically-controlled implements. This function is controlled by a button conveniently positioned on the joystick handle.

Quick-coupler/ISO-Euro Quick-coupler

Kubota offers two types of implement coupler, including an ISO-Euro quick-coupler. Both couplers can be used for fitting and removing a wide range of implements quickly and easily.

Interested in the new M7001

For more information about the new Kubota M7001 series, contact us via the form and receive an exclusive brochure on the new range of Kubota tractors.

×